http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps9402/data_sheet_c78-685394.html
And NX-OS 6.0 release
http://www.cisco.com/en/US/docs/switches/datacenter/sw/6_x/nx-os/release/notes/60_nx-os_release_note.html
Cisco NX-OS Release 6.0 supports the following new hardware:
•
N7K-F248XP-25, 48 port 1/10 Gigabit Ethernet SFP+ F2-series I/O module
N7K-F248XP-25, 48 port 1/10 Gigabit Ethernet SFP+ F2-series I/O module•N7K-C7010-FAB-2, Fabric 2 module for the Cisco Nexus 7000 10-Slot Chassis (N7K-C7010)
N7K-C7010-FAB-2, Fabric 2 module for the Cisco Nexus 7000 10-Slot Chassis (N7K-C7010)•N7K-C7018-FAB-2, Fabric 2 module for the Cisco Nexus 7000 18-Slot Chassis (N7K-C7018)
N7K-C7018-FAB-2, Fabric 2 module for the Cisco Nexus 7000 18-Slot Chassis (N7K-C7018)F2 Module Function:
48-Port 1 and 10 Gigabit Ethernet(Interface flexibility with SFP and SFP+ support)
Comprehensive Layer 2 and Layer 3 capabilities
Support for Cisco Nexus 2000 Series
FCoE support
Online insertion and removal (OIR)
F2 has 48 ports 1G/10G at linerate (=480G), which requires five FAB2 (5 x 110 = 550G).
But when you "Integrating F2-Series Modules Into a Cisco Nexus 7000 Series System"
You should notice at relese NX-OS 6.0:
•An F2-Series module requires its own F2-Series module VDC. This VDC is restricted to the F2-Series module; M1 and F1 ports cannot be in the F2-Series module VDC. The default VDC can also be configured as an F2-Series module VDC.
An F2-Series module requires its own F2-Series module VDC. This VDC is restricted to the F2-Series module; M1 and F1 ports cannot be in the F2-Series module VDC. The default VDC can also be configured as an F2-Series module VDC.•If you boot up an unconfigured Cisco Nexus 7000 Series switch that contains only F2-Series modules, then the default VDC is automatically configured as an F2-Series module VDC.
If you boot up an unconfigured Cisco Nexus 7000 Series switch that contains only F2-Series modules, then the default VDC is automatically configured as an F2-Series module VDC.•Some software features are not available on the F2-Series module in Cisco NX-OS Release 6.0(1). These include ACL Capture, ERSPAN, FCoE, GRE tunnels, LISP, MACSEC, MPLS, Netflow, online diagnostics, OTV, PIM-Bidir, and certain counters. Many of these features will be supported in future software releases; however, the F2-Series hardware does not support LISP, MPLS, and OTV, so these features will remain unavailable on the F2-Series module.
Some software features are not available on the F2-Series module in Cisco NX-OS Release 6.0(1). These include ACL Capture, ERSPAN, FCoE, GRE tunnels, LISP, MACSEC, MPLS, Netflow, online diagnostics, OTV, PIM-Bidir, and certain counters. Many of these features will be supported in future software releases; however, the F2-Series hardware does not support LISP, MPLS, and OTV, so these features will remain unavailable on the F2-Series module.Additional Resources:
沒有留言:
張貼留言