WB1 9.20 OSPFv3 Summarization

9.20 OSPFv3 Summarization

• Configure OSPFv3 Area 58 on the link between SW2 and R5.
• Create two new interfaces, Loopback 100 and Loopback 101 on SW2 with
IPv6 addresses FC00:X:0:8::8/64 and FC00:X:0:88::88/64 respectively.
• Advertise both Loopbacks into OSPF Area 58 on SW2.
• Configure R5 to summarize the two subnets to an optimal prefix.

----------------------------------------

R5:
ipv6 router ospf 1
area 58 range fc00:1::/56
!
interface FastEthernet 0/0
ipv6 ospf 1 area 58

SW2:
ipv6 unicast-routing
!
interface Vlan 58
ipv6 ospf 1 area 58
!
interface Loopback100
ipv6 address fc00:1:0:8::8/64
ipv6 ospf 1 area 58
!
interface Loopback101
ipv6 address fc00:1:0:88::88/64
ipv6 ospf 1 area 58

------------------------------------

Rack1R5#show ipv6 ospf neighbor
Rack1R5#show ipv6 route ospf
Rack1R3#show ipv6 route ospf
Rack1SW1#show ipv6 route ospf
Rack1R6#show ipv6 route ospf