WB1 9.23 IPv6 NAT-PT

9.23 IPv6 NAT-PT

• Configure R6 so that SW1 can access the IPv4 address 150.X.4.4 as
2000::9601:404.
• SW1 should source IPv6 packets off its VLAN 67 interface and R6 should
translate it to the IPv4 address 155.X.146.7.
• Create a static route on SW1 to ensure traffic for 2000::/96 does not
transit SW1’s Fa0/3 to reach R6.

---------------

R6:
interface FastEthernet 0/0.67
ipv6 nat
!
interface FastEthernet 0/0.146
ipv6 nat
!
ipv6 nat v6v4 source fc00:1:0:67::7 155.1.146.7
ipv6 nat v4v6 source 150.1.4.4 2000::9601:0404
!
ipv6 nat prefix 2000::/96
!
! 我沒下，也可以
!
ipv6 router rip RIPNG
redistribute connected

SW1
!
! 我是下 ipv6 route 2000::9601:0404/128 fc00:1:0:67::6
!
ipv6 route 2000::/96 fc00:1:0:67::6

-----------------------

Rack1R6#debug ipv6 nat detailed
Rack1SW1#ping ipv6 2000::9601:0404