WB1 9.26 IPv6 PIM BSR

9.26 IPv6 PIM BSR

• Configure R6 as the RP for the multicast domain and R4 as the BSR to
propagate this information.
• R1 should be able to ping the multicast group joined by R5.

--------------------------------------

R6:
ipv6 pim bsr candidate rp fc00:1:0:6::6 priority 100

R4:
ipv6 pim bsr candidate bsr fc00:1:0:4::4 priority 100

R5:
ipv6 route fc00:1:0:4::/64 Serial 0/1/0 multicast

R1:
!
ipv6 route FC00:1:0:4::/64 FastEthernet0/0 FE80::215:62FF:FE41:FD9D multicast

--------------------------------------

Rack1R1#show ipv6 pim bsr election
Rack1R5#show ipv6 pim bsr election
Rack1R1#show ipv6 pim range-list
Rack1R5#sh ipv6 pim range-list
Rack1R5#show ipv6 mroute

Rack1R1#ping ff08::8 repeat 10000
Output Interface: Serial 0/0

Rack1R4#show ipv6 mroute

Rack1R5#show ipv6 mroute