WB1 9.6 RIPng

9.6 RIPng

• Enable RIPng on the VLAN 146 segment connecting R1, R4, and R6
using the process name “RIPNG”.
• Create new Loopback 100 interfaces on R1, R4, and R6 with the IPv6
addresses FC00:X:0:Y::Y/64, where X is your rack number in decimal
notation and Y is your router number.
• Advertise these Loopback interfaces into RIPng.

--------------------------------------

R1:
ipv6 unicast-routing
!
interface FastEthernet 0/0
ipv6 rip RIPNG enable
!
interface Loopback100
ipv6 address fc00:1:0:1::1/64
ipv6 rip RIPNG enable

R4:
ipv6 unicast-routing
!
interface FastEthernet 0/1
ipv6 rip RIPNG enable
!
interface Loopback100
ipv6 address fc00:1:0:4::4/64
ipv6 rip RIPNG enable

R6:
ipv6 unicast-routing
!
interface FastEthernet 0/0.146
ipv6 rip RIPNG enable
!
interface Loopback100
ipv6 address fc00:1:0:6::6/64
ipv6 rip RIPNG enable